GIL Instruments
Gil Instruments designs and manufacturers measurement and control instrumentation
for other companies. They are especially adept at signal conditioning
for various and sundry sensing devices such as strain gauges or LVDTs
or RTDs or AC power inputs. They are willing to add the extra feature
that makes your product stand out.
___________________________________________________________________________________
Standard products
include....
PME35 Digital Indicators which take inputs from most any voltage or
current or resistance source for display in engineering units. The PME35
comes with options for on/off control and retransmission of the process
variable and automatic or manual zeroing. These indicators sell for
about $200.
SP Signal Conditioning
Modulescome mounted in a 2" x 2" x 1.5" cube. These are
simply the signal conditioning modules from the PME35 indicators, without
the indicator. Very versatile and economical with a selling price of
about $150.
CMC35 Loop Powered
Indicator is a 2-wire device that displays your 4-20 mA signal in engineering
units. It comes in a NEMA4 enclosure with a LCD display. Only $177.
Some of the special
instruments include.....
A system to control
and indicate pressure and temperature of paint while operating from
a truck battery in all kinds of weather.
A leak testing
indicator that operates with a programmable logic controller. The controller
starts the test, then zeroes the indicator, which, in turn, transmits
an analog signal to the PLC representing the leak. We were measuring
fractions of an inch of water. This cut the test interval from several
minutes to 5 seconds.
NEMA4 indicating
transmitters for both pressure and temperature used in the monitoring
of a methane burning electrical generator.
A special temperature
probe and indicator to monitor for hot spots in grain elevators. Remember
all the grain elevator fires you used to read about? This is a remedy.